Same pile of parts in the corner which has been used for the first two labs this quarter.

• Rods
• Clamps, including table edge clamps
• Galvanized steel tubing in ~4' lengths
• Rulers & meter sticks
• Protractors
• Calipers
• Masses of different types
• Mass scales
• String
• Scissors
• Taps
• C-clamps
• Ring stands

In addition to the general collection of components the following need to be setout for each sation.

• 1 IoLab device.
  • Connect each IoLab to the computer and ensure it is paired correctly with its associated dongle.
  • Check batteries, should be above 2.8V when shown in software.
  • The IoLab box should include an eye bolt, screwdriver, rigid bumper and the spring attached to a screw. Do NOT include the 2“ long stretchy spring, students cannot resist playing with them and stretching them out past the point of failure.
• A board to be used as an incline. There are 24” x 9“ boards stored under the NE corner of the island bench.