====== Electric Fields II: Acceleration and Deflection of Electrons ======
----

==== Common area ====

  * Magnets (can be used to divert the beam if there is a dead spot on the CRT screen)
  * "Exposed" CRT, //if available// (can be used to show the inside workings, especially the deflection plates)
  * Extra spare parts, especially the following:
    * Multimeters
    * CRT
    * 24 V power supply
    * 500 V power supply

| {{:phylabs:lab_courses:phys-120_130-wiki-home:winter-experiments:electric-fields-ii_acceleration-and-deflection-of-electrons:accel_def_electrons_common_area.png?direct&400|}} |

==== Individual station ====

  * CRT (w/ stuck-on ruler)
  * C-clamp
  * 24 V power supply
  * 500 V power supply
  * 2 Multimeters
  * 7 banana patch cables (4 black, 3 red)

| {{:phylabs:lab_courses:phys-120_130-wiki-home:winter-experiments:electric-fields-ii_acceleration-and-deflection-of-electrons:accel_def_electrons_individual.png?direct&400|}} |

==== Setup notes ====
  * Wire-up and check each CRT to ensure it is working correctly.
  * Adjust beam spot size (using potentiometer knob in the back) if beam spot is distorted or too large.
  * If necessary, clean the goop off the front of the CRT screen and re-attach cut rulers.